This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Smart Switches Reset/Flashing Orange/Green
azrael13
2022-01-28 00:52:13 - last edited 2022-01-29 08:37:49
Posts: 4
Helpful: 3
Solutions: 0
Stories: 0
Registered: 2022-01-28
Smart Switches Reset/Flashing Orange/Green
2022-01-28 00:52:13 - last edited 2022-01-29 08:37:49
I was adding a new smart plug and had just finished pairing it to the Kasa appwhen my 20+ switches throughout my house reset all at once. Every switch that was on turned off and every switch that was off turned on. All switches are now blinking orange and green.The app istelling me each switch must be set up again which is going to be a nightmare.There was no loss of internet connection and wifi is still working perfectly for every other device in my house. Oddly, the smart plugs were not affected. I have tried doing a soft reset of the switches without success. I have tried resetting my wifi without success. Heck, I even tried resetting thebreakers in my house without success. How do I fix this issue without having to remove all ofmy switch covers to find the deviceIDand manually re-pair each switch?!?!?
1
1
#1
Options
1 Accepted Solution
Solla-topee
2022-01-29 01:08:34 - last edited 2022-01-29 08:37:49
Posts: 12271
Helpful: 2058
Solutions: 1583
Stories: 8
Registered: 2020-05-19
Re:Smart Switches Reset/Flashing Orange/Green-Solution
2022-01-29 01:08:34 - last edited 2022-01-29 08:37:49
@FredJones
Hello everyone
Thank you for your feedback.
If you met similar concern that allkasadevice flashes amber and green , can you help confirm some information here for us to look into further:
- May I know how about the Led status on your smart devices at that moment, how many devices were affected?
- Do you use any Google deviceor link /unlink Google device at that time? What is the model of it?
- (if so , please unlink Googledevicefrom kasa or connect google speaker to a guest WiFi network temporarily )
- Can I have the Mac address of new added kasa device by private message?
- Model of Wi-Firouter
Thank you.
Please check the Wi-FiLed on smart devices:
If the Led is amber and green, that is in set up mode and requires addingthe device back into kasa app one by one.
Here are some guides that may help reset and set up kasa devices:
- How toresetTP-LinkKasasmart switch and plug?
- What should I do if I fail to configure theKasadevice?
This post will be marked as recommended solution for forum users to get the information in full easier and provide further feedback,thank you for your understanding.
Share Your Pet Story, Win Free Tapo Care.Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
#7
Options
10 Reply
azrael13
LV1
2022-01-28 00:59:58 - last edited 2022-01-28 01:00:19
Posts: 4
Helpful: 3
Solutions: 0
Stories: 0
Registered: 2022-01-28
Re:Smart Switches Reset/Flashing Orange/Green
2022-01-28 00:59:58 - last edited 2022-01-28 01:00:19
Correction: some smart plugswere affected and some werenot. Smart strips were not affected.
#2
Options
Solla-topee
2022-01-28 02:15:55 - last edited 2022-01-28 02:43:21
Posts: 12271
Helpful: 2058
Solutions: 1583
Stories: 8
Registered: 2020-05-19
Re:Smart Switches Reset/Flashing Orange/Green
2022-01-28 02:15:55 - last edited 2022-01-28 02:43:21
Hello@azrael13
Thank you for your valuable feedback.
1.Can you share the Mac address of the new added smart plug to us via private message
Can you provide the time when that happens, e,g around 9PM UTC+EST Jan 27, thank you
2. May I know do you use any Google device &the model of Google device, did you use unlink or link Google at that time?
If so, you could unlink Google device from kasafirst.
Share Your Pet Story, Win Free Tapo Care.Smart Action 2.0 Explore and meet the next level home automation.
#3
Options
azrael13
LV1
2022-01-28 02:47:07 - last edited 2022-01-28 02:48:23
Posts: 4
Helpful: 3
Solutions: 0
Stories: 0
Registered: 2022-01-28
Re:Smart Switches Reset/Flashing Orange/Green
2022-01-28 02:47:07 - last edited 2022-01-28 02:48:23
@Solla-topee
I sent you a private message with the MAC address and the time of the incident. The plug had been used before without any problems, I was setting it up as a new plug for a new lamp. We have a Google smart home ecosystem with multiple Google devices. Wifi is a Google mesh network. The wifi was working correctly leading up to the incident, during the incident, and following the incident. I was not linking the plug to the Google system at the time of the incident: I was solely within the Kasa app.
2
2
#4
Options
Solla-topee
2022-01-28 03:43:55
Posts: 12271
Helpful: 2058
Solutions: 1583
Stories: 8
Registered: 2020-05-19
Re:Smart Switches Reset/Flashing Orange/Green
2022-01-28 03:43:55
Hello@azrael13
Appreciatefor more case details!
If the Kasa Wi-FiLEDflashes orange and green, the smart device is inset up mode,I'm afraid we will need to addthem back in the Kasa app one by one.
As this sounds quite unusual, I would like to escalate your case through support email to investigatefurther,please check your inbox later. Thank you.
Share Your Pet Story, Win Free Tapo Care.Smart Action 2.0 Explore and meet the next level home automation.
#5
Options
FredJones
LV1
2022-01-28 19:58:48
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2022-01-28
Re:Smart Switches Reset/Flashing Orange/Green
2022-01-28 19:58:48
I'd like to add that the same thing happened to me about an hour ago. I was setting up two new smart dimmers and everything in my house that's TP-Link (except for the two switches I had just added) reset at the exact same time. Smart plugs were affected in my case. All my devices in the app are grayed out and say "Device Unreachable".
Do I have to remove each switch from the app before setting everything up again?
I'd also rather not have to do this multiple times. It seems as though there's a wider issue here. Is there any way for me to track the progress of a fix?
Thank you!
#6
Options
Solla-topee
2022-01-29 01:08:34 - last edited 2022-01-29 08:37:49
Posts: 12271
Helpful: 2058
Solutions: 1583
Stories: 8
Registered: 2020-05-19
Re:Smart Switches Reset/Flashing Orange/Green-Solution
2022-01-29 01:08:34 - last edited 2022-01-29 08:37:49
@FredJones
Hello everyone
Thank you for your feedback.
If you met similar concern that allkasadevice flashes amber and green , can you help confirm some information here for us to look into further:
- May I know how about the Led status on your smart devices at that moment, how many devices were affected?
- Do you use any Google deviceor link /unlink Google device at that time? What is the model of it?
- (if so , please unlink Googledevicefrom kasa or connect google speaker to a guest WiFi network temporarily )
- Can I have the Mac address of new added kasa device by private message?
- Model of Wi-Firouter
Thank you.
Please check the Wi-FiLed on smart devices:
If the Led is amber and green, that is in set up mode and requires addingthe device back into kasa app one by one.
Here are some guides that may help reset and set up kasa devices:
- How toresetTP-LinkKasasmart switch and plug?
- What should I do if I fail to configure theKasadevice?
This post will be marked as recommended solution for forum users to get the information in full easier and provide further feedback,thank you for your understanding.
Share Your Pet Story, Win Free Tapo Care.Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
#7
Options
skornstein
LV1
2022-01-29 03:03:33
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2022-01-29
Re:Smart Switches Reset/Flashing Orange/Green
2022-01-29 03:03:33
@azrael13This exact same thing happened to me. I had about 18 switches set up. Installed a new one, and as soon as I activated it, every switch in the house disconnected, turned on, and started flashing amber and green.
#8
Options
skornstein
LV1
2022-01-29 04:03:33
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2022-01-29
Re:Smart Switches Reset/Flashing Orange/Green
2022-01-29 04:03:33
It seems I now need to manually set up all of my devices again which is a huge pain. Any advice on how to tell which WiFi SSID is tied to which switch? They are nearly all 3-ways. Was a huge fan of these until this happened. Seems like a ridiculous bug.
#9
Options
FredJones
LV1
2022-01-29 16:39:46
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2022-01-28
Re:Smart Switches Reset/Flashing Orange/Green
2022-01-29 16:39:46
@Solla-topee
I'm not sure how this is a solution? Has your development team implemented a fix yet? I'm reluctant to re-setup all of my devices only to have everything reset again on the last switch.
Answers to your questions:
- LED status on all switches isnow solid red but was originally flashing orange/green (I'm aware of how to restart the switches when I'm ready to set them up). All smart plugs are still flashing orange/green. 20 devices total were reset.
- I did not use or link/unlink any Google devices at the time everything reset.
- I'll send you the MAC address by private message.
- I have a Google Wifi Mesh network in my home. One newer model Nest Wifi as the base station. Three older Google Wifiaccess points. All have been working optimally for roughly two years, with up-to-date firmware, and I have no issues with connection on any devices before, during or after my Kasa devices reset.
Please let me know how I can track the progress of your development team to ensure everything is fixed before I spend the large amount of time it will take to re-setup up my entire system.
Thank you!
#10
Options
azrael13
LV1
2022-02-03 00:19:54
Posts: 4
Helpful: 3
Solutions: 0
Stories: 0
Registered: 2022-01-28
Re:Smart Switches Reset/Flashing Orange/Green
2022-02-03 00:19:54
@skornstein
You should be able to see the MAC printed on the switch if you remove the faceplate. Other option would be to wait until all the devices switch to the steadyred LED and then reset them one by one. Personally, I'm not goingto do this until the bug is resolved because I don't want to have to do it more than once.
Anyone heard anything about when the bug is expected to be resolved? I haven't seen a Kasa app update.
#11
Options
